In the actual processing and production process, many customers do not pay attention to the cleanliness of the equipment when using hammer crushers. If the equipment is not cleaned in a timely manner, it will have a certain impact on the operation of the equipment and increase the maintenance cost of the equipment. Therefore, the cleaning of hammer crushers is also an important part of equipment maintenance. The cleaning of hammer crushers mainly includes four aspects:

1. Clean the inlet and outlet of the hammer crusher.

Regularly check the inlet and outlet to see if there are any residual materials from the last operation of the crusher. If there are, it is recommended to handle them in a timely manner to ensure that the inlet and outlet are clean and tidy, otherwise it may affect the quality of the finished product.

2. Clean the belt of the hammer crusher.

Regularly check for oil stains on the belt and pulley. If there are, be sure to wipe the belt and pulley with a clean cloth in a timely manner, without leaving any stains or dust impurities.

3. Clean the exterior of the crusher.

For the external cleaning of the hammer crusher, the main focus is on checking the surface cleanliness of the casing and the cleanliness of the ground. The cleaning of the crusher is mainly to prevent material blockage and ensure its normal operation.

4. Clean the interior of the crushing chamber.

Check if there are any other debris in the crushing chamber of the hammer crusher. It is important to disconnect the power before cleaning. When opening the crushing chamber, clean the surrounding material first, and then clean the remaining material on the hammer head; Due to the presence of lining plates in the crushing chamber, it is recommended that some paint on the lining plates be worn off by metal materials when selecting the cutterhead. Therefore, we also need to check whether there are impurities and paint on the walls inside the crushing chamber. When cleaning the crusher, we need to use towels, brushes and other related cleaning tools for cleaning. After cleaning the materials inside the equipment, it is recommended to wipe them with 75% ethanol and then close the crushing chamber. Cleaning the crushing chamber should be carried out before starting the equipment, mainly to reduce the load during equipment startup.

Cleaning the hammer crusher is a very important and easily overlooked task. The editor reminds users and friends to do a good job in cleaning the hammer crusher.